4.2. Inspection Item and Period

4.2. Inspection Item and Period

 

Table 4‑2 Inspection Items and Periods

No.	Inspection Intervals			Inspection Items	Inspection method	Standards	Remark
	Daily	3months	1year
Robot Manipulator and Axes common
1	○			Cleaning	Examine dirt and dust with naked eyes
2		○		Inspection wiring	·Examine any cable damages ·Examine cable fixing bracket tightening, paint marking with naked eyes ·Examine any cable cover damages with naked eyes
3		○		Main bolts	Examine paint marking with naked eyes
4	○			Motor	Check the abnormal heating Check the abnormal sound
5			○	Brake	Check the ON/OFF operation of brake release switch Note) Turn the switch off in a second because the ARM of working axis may be dropped when the brake release switch is on	When the brake release switch is OFF, ARM of End Effect will not be dropped.
Axis S, H, V
6	○			Reducer	Check the abnormal sound Check the shaking(vibrating)
Axis R2, B, R1
7		○		Reducer	Check the abnormal sound Check the shaking(vibrating)
8		○		End Effect tightening bolts	Examine paint marking with naked eyes
9		○		Diversion	There is any diversion by rotating each axis to the right and reverse direction	Should not feel diversion by touch

 

n If the robot is utilized in adverse condition(such as spot welding, grinding, etc.), perform the inspection more frequently to ensure proper reliability of the robot system

n Inspect all visible cabling, and replace them if damaged.

n Check the mechanical bumper devices for deformation and damage. If the bumper or Dog is bent, replace it immediately.

n Check the tightening torque of main bolts as shown in [Figure 4.1].

n Check the abnormal noise in an automatic or teaching mode in order to ensure the condition of power transmission (such as motor, reducer, etc).