5.1.7. Arm Frame - Gear Box

5.1.7. Arm Frame - Gear Box

 

 

n  Grease Replenishment

 

(1)   Prepare a grease nipple A-PT1/4.

 

(2)   Remove the outlet plug and the inlet plug.

 

(3)   Remove as much used grease as possible by connecting a silicon tube through the injection hole and the outlet hole.

(GADUS S2 V46 2 grease will not outlet easily because of high viscosity.)

 

(4)   Mount the grease nipple A-PT1/4, and fill with a grease gun. Fill with as much grease as you have drained.

 

ü  Grease type : GADUS S2 V46 2 ü  Amount of grease : About 30cc

 

(5)   Remove grease nipple A-PT1/4 from grease inlet port.

 

(6)   Reinstall the grease plugs with seal tape.

 

n  Grease Replacement

 

(1)   In the case of an arm frame gearbox, do not replace grease until after 6–7 years (or after an overhaul), which is the normal replacement interval.

 

(2)   When replacing all the grease in the gearbox, remove the used grease by dismounting the R2/B/R1-shaft motor. Then, fill with new grease. For the detailed work method, contact us.

(When dismounting the motor, the point of origin should be realigned because the tool position will be changed.)