5.1. Error Display

If the Hi-LUB is connected to a PLC or others, it emits a signal in case of malfunction. The type of error is shown on the display.

dC	DeviceNet Disconnected
	a) Check the DeviceNet connection.
	b) Check the Hi-LUB station number. The number is 03.
	c) Check for any disconnection, and check the wiring.
Lo	Low Grease
	a) Check the grease level.
	b) Replace and refill the grease pouch.
	* Press the Reset key once after the refilling, and then the alarm will disappear.
Em	Empty Grease (Injection will be stopped after the Lo alarm occurs ten times.)
	a) Check the grease level.
	b) Replace and refill the grease pouch.
	* Press the Reset key once after the refilling, and then the alarm will disappear.
P#	Pressure Alarm (Displays the number of ports that have overpressure)
	a) Check the cause of overpressure.
	b) Resolve the cause by removing the problematic port hose and tube.
	* After resolving the problems, press the Run key for operation.

5.1. Error Display​