4. Error Description

 

Code	E1192	Arc sensing error (Current range exceeded)
Detail	This error occurs when detected welding current exceeds the range. That is, “Abnormal judgment margin” is exceeded for “Abnormal judgment time”.
Action	1. Check welding current detection circuit. 2. For end point, set to “Current abnormal processing method = <End point>”. 3. For non-end point, adjust “Current abnormal judgment margin” and “Current abnormal judgment time”.

 

Code	E1193	Arc sensing error (Current detection too unstable)
Detail	This error occurs when the number of weaving that cannot be fitted to the curve from the detected current value in arc sensing using the curve fitting algorithm exceeds “Permitted cycle exceeding reference value”.
Action	1. Check welding current detection circuit. 2. Adjust the “Bead judgment curve” value slightly higher in – value. 3. Stop location is bead and when the bead detection function is used set to “Bead detection = <Enable>”.

 

Code	E1194	Arc sensing error (Left/Right sensing range exceeded)
Detail	This error occurs when left/right tracking cannot be done for a certain period (5 cycles).
Action	Adjust the current coefficient or maximum calibration distance by sample.

 

Code	E1195	Arc sensing error (Top/Bottom sensing range exceeded)
Detail	This error occurs when left/right tracking cannot be done for a certain period (5 cycles).
Action	Adjust the current coefficient or maximum calibration distance by sample.

 

Code	E1296	Allocate welding current input port
Detail	This occurs when the welding current input port for arc sensing is not set.
Action	Assign the input port for “13: Welding current input port assignment” in arc welding parameter (System > 4: Application parameter > 2: Arc welding).

 

Code	E1295	Arc sensing only supports weaving shape=simple harmonic motion.
Detail	This occurs when the weaving type of weaving condition is not simple harmonic oscillation.
Action	Change the weaving type of weaving condition to simple harmonic oscillation.

 

Code	E1353	Exceeded the permitted trace deviation distance.
Detail	This occurs when the trace deviation distance by tracking exceeded the permitted value.
Action	Edit the teaching location or adjust the permitted trace deviation distance.